• Study of Flotation Parameters for Copper Recovery from

    A detailed study was conducted to evaluate the effect of particle size, pH, flotation time, collector type and addition on efficiency of tennantite flotation. It was shown that maximum copper recovery of 95,3% was obtained at pH 12.3 by lime.It was suggested to grind up to 65.72% of -0.074 mm to achieve the optimum recovery of copper and high

  • Copper Flotation Elmhurst University

    The copper minerals and waste rock are separated at the mill using froth flotation. The copper ore slurry from the grinding mills is mixed with milk of lime (simply water and ground-up limestone) to give a basic pH, pine oil (yes, it comes from trees -- a by-product of paper mills) to make bubbles, an alcohol to strengthen the bubbles, and a

  • (PDF) A Review of the Flotation of Copper Minerals

    The recovery of these copper minerals by flotation or hydrometallurgy from ores, typically containing 0.5%TCu (open pit mines) and 1-2%TCu (underground mines) is of great commercial importance

  • COPPER ORE FLOTATION PARAMETERS OPTIMIZATION USING

    In the mathematical model the effect of four process parameters (parameters are denoted by X1, X2. X3 and X4) will be tested individually on grade (YG) (enrichment) of copper in the final product of North Waziristan. When the value of NaPX is 200 gm/ton, pH is 11.5,

  • Author: Sardar Ali, M Mansoor Khan, Nisar Muhammad, Mian Izhar-ul Haq
  • Combined Effect of Operating Parameters on Separation

    Sep 24, 2018· This study aims to investigate the effects of operational variables on concentrate grade, recovery, separation efficiency, and kinetic parameters of the copper flotation process. For this purpose, the effects of the pulp solids content, collector and frother dosage, and preparation and concentrate collection time were studied using a Taguchi experimental design.

  • Cited by: 3
  • Copper Flotation Mineral Processing & Metallurgy

    Metallurgical ContentA Copper Flotation FlowsheetCOPPER MININGCRUSHING COPPER ORECOPPER ORE STORAGEGRINDING COPPER ORECOPPER FLOTATION CIRCUITCOPPER THICKENING AND FILTERINGPROCESS CONTROLSCopper Flotation Process SummaryFlotation of Copper Ores Although basic porphyry copper flotation and metallurgy has remained virtually the

  • Combined Effect of Operating Parameters on Separation

    rameters on flotation process efficiency [8, 28, 33, 34, 39]. Although copper flotation and the effect of key parameters and operational conditions have been studied previously [2, 3, 10, 31], the main focus of these studies have been the impact of each individual operational condition on the recov-ery of the flotation process.

  • Conventional Flotation To Produce Copper Concentrates

    Copper Gold Mining Project crushing, screening, grinding The Minto Mine is an open pit mining operation with conventional crushing, and flotation to produce copper concentrates with significant gold and silver credits.

  • Effects of particle size on flotation performance in the

    Feb 15, 2019· In this investigation, the effects of particle size on flotation parameters of copper-gold and lead were studied by flotation kinetic analysis using the determinate reagent dosages. Flotation conditional tests were carried out to find out the optimum dosage for flotation

  • Flotation Parameters For Copper Sulphide Ore Pdf

    Copper Flotation Parameters Of Chalcocite Ore. Flotation of a copper sulphide ore from Okiep using thiol . Flotation of a copper sulphide ore from Okiep using thiol collectors and their mixtures The Journal of The South African Institute of Mining and Metallurgy VOLUME 105 NONREFEREED PAPER MARCH 2005 201 Figure 1The final cumulative copper recovery vs. collector dosage obtained with C2X

  • COPPER ORE FLOTATION PARAMETERS OPTIMIZATION USING

    In the mathematical model the effect of four process parameters (parameters are denoted by X1, X2. X3 and X4) will be tested individually on grade (YG) (enrichment) of copper in the final product of North Waziristan. When the value of NaPX is 200 gm/ton, pH is 11.5,

  • parameters on the flotation of copper

    parameters on the flotaton of copper. Development of a Combined Flotation and High Pressure ,Flotation behavior of copper and nickel from mine tailing was investigated un der varying concentrations of PAX ranging from 0 g/t to 200 g/t when other flo tation parameters were fixed at 200 g/t of MIBC concentration, 50 g/t of pulp density, slurry pH of 5400 rpm of stirring speed and 6 minutes

  • Investigation of Flotation Parameters for Copper Recovery

    A flotation pre-treatment study for the separation of enargite (Cu 3 AsS 4) from chalcopyrite (CuFeS 2) ores of different origins was investigated in this work.The copper ore bearing enargite mineral contained 5.87 mass% As and 16.50 mass% Cu while the chalcopyrite bearing ore contained 0.32 mass% As and 21.63 mass% Cu.

  • A study on the modified flotation parameters and

    (2017). A study on the modified flotation parameters and selectivity index in copper flotation. Particulate Science and Technology: Vol. 35, No. 1, pp. 38-44.

  • Parameters Of Flotation Cell Hadoop Training Chennai

    copper flotation parameters of chalcocite ore. MEI Blog: Flotation of chalcocite at very low pH. Aug 21, 2012 I do not know how much of this chalcocite is in the froth on the top of the the stability of the ore characteristics in relation to these parameters. View Details Send Enquiry.

  • OPTIMIZATION OF FLOTATION PARAMETERS FOR

    parameters in the separation of copper-molybdenum (Bulatovic, 2007). The floatability of molybdenum in porphyry copper ores depends on some factors such as the effect of mineralogy, slime coatings, grinding and mineral liberation, and flotation reagents (Shirley and Sutulov, 1985; Hernlund, 1961).

  • Effects of particle size on flotation performance in the

    Feb 15, 2019· In this investigation, the effects of particle size on flotation parameters of copper-gold and lead were studied by flotation kinetic analysis using the determinate reagent dosages. Flotation conditional tests were carried out to find out the optimum dosage for flotation

  • flotation parameters for copper sulphide ore pdf

    Flotation process parameters were studied to optimization of flotation parameters, the copper ore showed that the sulphide mineralization is present.get price. Investigation of Flotation Parameters for Copper Recovery from . Keywords: enargite, chalcopyrite, arsenic, flotation, copper resource. 1.

  • Froth Flotation Circuit Design And Basic Testwork

    Froth flotation is a very important mineral concentration process that is used to recover a vast array of different minerals containing valuable commodities such as copper, lead, zinc, nickel, molybdenum, tungsten, silver, gold, phosphate and potash.

  • Copper Ore Processing Methods

    The four major steps in the production of marketable copper are mining, concentrating, smelting, and refining. In a few instances, however, leaching takes the place of concentrating, smelting, and refining. At present, although considerable leaching and direct-smelting ores are produced, the bulk of the copper ore mined is concentrated. The milling of copper ores as practiced in the larger

  • Effects of Process Parameters on Selective Flotation of

    this also helped in depression of pyrite. Subsequently, zinc was floated using copper sulphate as activator and xanthate and MIBC as collector and frother respectively at a higher pH. The results on the studies of the effects of various process parameters on flotation performance are discussed below : Effects of Granulometry of the Flotation Feed

  • A cascaded recognition method for copper rougher flotation

    Jan 16, 2018· Presents the two-stage recognition strategy for copper flotation rougher condition recognition. • Summarizes the visual features and their extraction methods. • Presents the multi-source data fusion framework of process parameters and visual features. • The feed ore types are divided into four classes and the identification model are

  • FLOTATION OF COPPER MINERALS FROM NORTH M.

    Flotation process parameters were studied to concentrate the copper content i.e. Chalcopyrite of North Waziristan copper-ore on Pilot-scale to obtain a copper concentrate suitable for further metallurgical treatment. The important flotation parameters, e.g. type and dosage of collector, dosage of depressent,

  • Parametric Optimization in Rougher Flotation Performance

    The dominant challenge of current copper beneficiation plants is the low recoverability of oxide copper-bearing minerals associated with sulfide type ones. Furthermore, applying commonly used conventional methodologies does not allow the interactional effects of critical parameters in the flotation processes to be investigated, which is mostly overlooked in the literature.

  • A study on the modified flotation parameters and

    (2017). A study on the modified flotation parameters and selectivity index in copper flotation. Particulate Science and Technology: Vol. 35, No. 1, pp. 38-44.

  • Flotation Of Copper Ore Steampot

    Flotation Of Copper Ore. Differential flotation sequence a differential copper-cobalt flotation separation which begins with selective copper flotation by raising the slurry ph to 10 with lime and using a dithiophosphate copper collector.The tails produced in the first differential flotation step is followed by a pyrite and pyrrhotite flotation stage using xanthate.

  • Investigation of Flotation Parameters for Copper Recovery

    A flotation pre-treatment study for the separation of enargite (Cu 3 AsS 4) from chalcopyrite (CuFeS 2) ores of different origins was investigated in this work.The copper ore bearing enargite mineral contained 5.87 mass% As and 16.50 mass% Cu while the chalcopyrite bearing ore contained 0.32 mass% As and 21.63 mass% Cu.

  • parameters on the flotation of copper

    parameters on the flotaton of copper. Development of a Combined Flotation and High Pressure ,Flotation behavior of copper and nickel from mine tailing was investigated un der varying concentrations of PAX ranging from 0 g/t to 200 g/t when other flo tation parameters were fixed at 200 g/t of MIBC concentration, 50 g/t of pulp density, slurry pH of 5400 rpm of stirring speed and 6 minutes

  • FLOTATION OF COPPER MINERALS FROM NORTH M.

    Flotation process parameters were studied to concentrate the copper content i.e. Chalcopyrite of North Waziristan copper-ore on Pilot-scale to obtain a copper concentrate suitable for further metallurgical treatment. The important flotation parameters, e.g. type and dosage of collector, dosage of depressent,

  • Parametric Optimization in Rougher Flotation Performance

    The dominant challenge of current copper beneficiation plants is the low recoverability of oxide copper-bearing minerals associated with sulfide type ones. Furthermore, applying commonly used conventional methodologies does not allow the interactional effects of critical parameters in the flotation processes to be investigated, which is mostly overlooked in the literature.

  • flotation of copper

    RECOVERY OF COPPER FROM OXIDE COPPER ORE BY . RECOVERY OF COPPER FROM OXIDE COPPER ORE BY FLOTATION AND LEACHING Kiraz Emirhan M.S. Department of Mining Engineering Supervisor Prof. Dr. Mustafa Ümit Atalay December 2014 65 pages The aim of this study was the recovery of copper from the oxide copper ore by froth flotation and agitating sulphuric acid (H 2 SO

  • Effects of Process Parameters on Selective Flotation of

    this also helped in depression of pyrite. Subsequently, zinc was floated using copper sulphate as activator and xanthate and MIBC as collector and frother respectively at a higher pH. The results on the studies of the effects of various process parameters on flotation performance are discussed below : Effects of Granulometry of the Flotation Feed

  • Froth Flotation Circuit Design And Basic Testwork

    Froth flotation is a very important mineral concentration process that is used to recover a vast array of different minerals containing valuable commodities such as copper, lead, zinc, nickel, molybdenum, tungsten, silver, gold, phosphate and potash.

  • Acid leaching of oxide–sulfide copper ore prior the

    copper removal, from such minerals blend, was obtained. Through this study, the influence of some parameters, affecting the leaching process, and the flotation pro-cess of the leach residue were defined. Finally, the oxide–sulfide copper ore, used in the experimental part, was taken from the current mine works in the Copper Mine Cerovo.

  • Methyl Isobutyl CarbInol

    measuring copper recovery rate and copper concentrate grade. l results: for both copper ores, MiBc outperforms other frothers in terms of copper the field and all other flotation parameters (such as feed, collector, air flow and etc.) were kept at the same level.

  • Development of a Combined Flotation and High Pressure

    Flotation behavior of copper and nickel from mine tailing was investigated un-der varying concentrations of PAX ranging from 0 g/t to 200 g/t when other flo-tation parameters were fixed at 200 g/t of MIBC concentration, 50 g/t of pulp density, slurry pH of 5400 rpm of stirring speed and 6 minutes flotation

  • 17 Flotation of Gold Ores

    In flotation of gold-containing base metal ores, a number of modifiers normally used for selective flotation of copper lead, lead zinc and copper lead zinc have a negative effect on the floatability of gold. Such modifiers include ZnSO. 4 ·7H. 2. O, SO. 2,Na. 2. S.

  • The Effect of Sulfurization Process on Flotation of Copper

    The effect of the parameters such as pH, pulp density, particle size and collector amount were investigated. KAX was used as collector and Dow-250 was used as frother. Key Words: Sulfurization, flotation, copper, gold, silver 1. INTRODUCTION Flotation has been utilized in the mineral processing industry to concentrate base